Epson 400 Series - Manual (Page 43)

Making Detailed Adjustments
43
Customizing Projector Features
Use the settings in this section to adjust the image size and position, suppress on-screen text,
and select basic setup options.
Image Sizing
Before adjusting any of these settings, make sure you have already selected an appropriate
aspect ratio for the type of picture you’re viewing (see page 26).
■ Output Scaling
For component video formats, this setting lets you see the edges of the image that are not
normally visible in the picture (see page 63). Select
Larger to view both the hidden and
visible parts of the image. Normal displays images at the standard size.
For HDMI signals, select Auto for normal operation. Select Smaller to show a slightly
reduced image if you see interference at the top or bottom of the screen for computer
images (displays digital video at standard size). Select
Normal to expand digital video so
it includes both the hidden and visible parts of the picture (displays computer images at
full size).
■ Position
Use the arrow buttons to fine-tune the position of the image on the screen.
■ Zoom Caption
Lets you adjust the shape and position of the image so that subtitles are visible (available
only if the aspect ratio has been set to Zoom). Use
Vertical Size to adjust the proportions
of the image, and Zoom Position to move the image up or down.
■ Aspect
This setting lets you change the aspect ratio of your image, and works the same as
pressing the
Aspect button on the remote control. See page 26 for more information.
Image Æ Advanced Æ Output Scaling
Image Æ Position
Image Æ Zoom Caption
Image Æ Aspect
PowerLite Cinema 400.book Page 43 Friday, July 7, 2006 2:24 PM