Emerson Radio AV400 - Manual (Page 23)

22
2. Press and hold OK until the preset channel icon flashes.
3. Press or use the remote’s numeric keys to select the preset channel number .
4. Press OK once more to store into memory when “SAVED” icon flashes.
Hz M
Sleep
Setting the Sleep Timer.
This feature allows you to select a time for the system to switch to the Standby mode automatically.
1. Press SLEEP on the remote control repeatedly to cycle through the below sleep timer options.
The available options are :
SLEEP OFF -> SLEEP 120 -> SLEEP 90 -> SLEEP 60 -> SLEEP 30 -> SLEEP 15
2. The ‘SLEEP’ icon will appear when the desired Sleep time is set on.
Checking remaining Sleep Time
When the Sleep timer is switched on, you can check the remaining time before the unit switches to Standby
mode. Press SLEEP once, the remaining time will be displayed.
Cancelling the Sleep Timer
To switch off the Sleep Timer, press SLEEP repeatedly until “SLEEP OFF” is displayed.
Playing DVD/CDs
1. To play DVD/CD disc, press to open the disc tray.
2. Load disc onto the tray with the label side facing upward.
3. Press to close the tray. The disc will start playing automatically. There may be a short delay before
playing while the player reads the menu from the disc.
When DVD/CD Disc is playing
Pause, Slow Motion and Frame-by-Frame Advance
Press to freeze playing temporarily. Press repeatedly to select between “Pause” and “Freeze” modes. In the
“Pause” mode, press
to start forward/backward slow motion play ( increase or decrease speed by
pressing repeatedly). In “Freeze” mode, each press of will move the play forward/
backward by one frame. Press to resume normal playing.
Skip
Press to skip forward or backward a chapter.
Fast Search
Press to search through the disc forward or backward quickly. Pressing will increase/
decrease the search speed.
(Note: there is no sound in Fast Search, Slow Motion and Frame-by-frame Advance modes. Press to
resume normal playing.)