Introduction / safety, Energy-saving under-upboard light, Introduction – Livarno 2592/014L·2592/016L User Manual

Page 6: Proper use, Included items, Description of parts, Technical information, Safety, Safety advice

Advertising
background image

6 GB

Energy-saving

under-upboard light

Q

Introduction

Please read carefully and completely

through these operating instructions. Fold
out the page with the illustrations. These

instructions form part of the product and contain
important information about bringing the product
into use and its handling.
Always observe all the safety advice. Check that
the correct mains voltage is available and that all
the parts have been properly assembled before
bringing into use. Should you have any questions
or be uncertain as to how to operate the device,
please get in touch with your dealer or service
point. Please keep these instructions in a safe place
and hand them on to a third party if necessary.

Q



Proper use

This light is suitable only for interior use, in dry and
enclosed spaces. The light should be positioned
within reach so that the switch can be operated
conveniently. The light can be fitted to all normally
inflammable surfaces. Any use other than that
described above or modification to the lamp is not
permitted and may lead to damage to people or
property. Moreover, there is the risk of injury or loss
of life and that the lamp may develop technical
faults such as short circuit or fire or give an electric
shock. This lamp is intended for use only in a do-
mestic environment.

Q



Included items

Check that all the items and accessories are
present and that the lamp is in perfect condition
immediately after unpacking.

1 Energy-saving under-cupboard light,

Model 2592 / 014L or 2592 / 016L

1 T5 fluorescent tube, 13 W

1 Power cable
1 Connection cable
2 Dowels
2 Screws
1 Operating instructions

Q



Description of parts

1

Light connector socket

2

ON / OFF switch

3

Light body

4

Mounting holes for wall attachment

5

Connecting socket

6

Protective head guard

7

Connecting cable

8

Mounting holes for underside attachment

9

Pivoting strip light

10

Protective glass cover

11

Bulb (fluorescent tube type)

12

Power cable

Q



Technical information

Operational voltage:

230 - 240 V ~ 50 Hz

Bulb:

T5 fluorescent tube type
bulb, 13 W

Nominal output:

1 x 13 W

Dimensions:

(L x W x H)
575 x 84 x 28 mm

Protection class:

II

Protection type:

IP20

Q

Safety

Safety advice

The right to claim under the guarantee shall be ren-
dered invalid in respect of damage caused by the
non-observance of these operating instructions. No
liability is accepted for consequent damage. No
liability is accepted for damage to property or
persons caused by improper handling or non-
observance of the safety advice.

Introduction / Safety

Advertising
This manual is related to the following products: