Changing the bulbs, Maintenance and cleaning, Disposal – Livarno 2592/014L·2592/016L User Manual

Page 9: Information, Guarantee

Advertising
background image

9

GB

j

Allow the light to cool down completely.

j

Turn the strip light

9

into the desired direction.

The strip light can pivot through about 45 °.

Q



Changing the bulbs

c CAUTION! DANgER Of ElECTRIC

ShOCk! To replace the bulb

11

, first of all dis-

connect the light from the mains circuit. To do this
pull the mains plug on the mains lead

12

out of the

socket.

j

Allow the lamp to cool down completely.

j

Use a clean, lint-free cloth when changing light

bulbs

11

.

j

Pull the protective glass cover

10

out of the

guides on both sides. Place the protective glass
cover carefully to one side.

j

Fold out the plastic clips on the right and left.

j

Rotate the bulb

11

¼ turn and pull it out of the

fitting.

j

Use a 230 - 240 volt T5 fluorescent tube type

bulb with a maximum power output of 13 watt.

j

Insert a new bulb carefully into the fitting and

turn it through ¼ turn to fix it in place. Check
that it is correctly seated.

j

Fold the plastic clips back into place until they

engage.

j

Shift the protecting glass disk

10

(smooth page

should indicate outward) again into the guide rail.

j

Turn the strip light

9

into the desired direction.

m CAUTION! Make sure that all under-cabinet

lights are linked together by means of the con-
necting cables

7

before inserting the power

cable

12

into the socket.

j

Insert the mains plug on the mains lead

12

back into the socket. Your light is now ready
for operation.

Q

Maintenance and Cleaning

c CAUTION! DANgER Of ElECTRIC

ShOCk! To do this pull the mains plug on the
mains lead

12

out of the socket.

j

Allow the lamp to cool down completely.

c CAUTION! DANgER Of ElECTRIC

ShOCk! For reasons of electrical safety, the
light must never be cleaned with water or other
fluids or be immersed in water. When cleaning,
only use a dry, lint-free cloth.

j

Do not use any solvents, petrol or similar. This

would cause damage to the light.

Q



Disposal

The packaging and ancillary packing consist entirely
of environmentally-friendly materials. They can be
disposed of at your local recycling facility.

The symbol of the wheelie bin with the

line through it means that, in the European
Union, the product has to be disposed

of in a separate refuse collection. This applies to
the product and to all components bearing this
symbol. Products marked in this way may not be
disposed of along with normal domestic waste but
have to be handed in at a recycling collection point
for electrical and electronic appliances. Recycling
helps to reduce the consumption of raw materials
and to ease the burden on the environment.

fluorescent lamps are hazardous waste!
They may contain small quantities of harmful sub-
stances, e.g. mercury (Hg). Do not dispose of them
with normal domestic waste but hand them in to a
recycling collection point for electrical and electronic
appliances.

Q

Information

Q



guarantee

You receive a 36 month warranty on this product,
valid from the date of purchase.
The device has been carefully produced under
strict quality control.
Within the warranty period we shall rectify without
charge all material and manufacturing defects. In
the event of a defect arising during the warranty
period, please send the device to the listed Service

Preparations for use / Maintenance and Cleaning / Disposal / Information

Advertising
This manual is related to the following products: