Safety – Livarno 103792-14-01-BS/103792-14-02-BS User Manual

Page 7

Advertising
background image

7

GB/IE/CY

Safety

Avoid the danger of
death from electric shock!

Before use, ensure that the mains
voltage available is the same as the
required operating voltage for the
device (230–240 V~).

Before connecting the device to the
mains you should always check the
device and the mains lead for any
damage. A damaged device repre-
sents the danger of death from
electric shock.

Do not use the device if you find any
damage.

Please consult a specialist electrician
if you discover any damage or prob-
lems with the device, or for the per-
formance of repairs to the device.

Never open any of the electrical
equipment or insert any objects into
it. Such interventions represent the
danger of death from electric shock.

It is essential that the device does
not come into contact with water or
other liquids.

Protect the power supply cable

4

from sharp edges, mechanical strain
and hot surfaces.

Never use the device in the immedi-
ate vicinity of a bathtub, shower or
swimming pool.

Do not look directly into the light or
its reflection. Do not aim the light di-
rectly at people. This could produce
glare, leading to accidents.

If direct or reflected light strikes your
eyes, close them and move your
head immediately out of the light.

Operate the lamp only with supplied
mains adapter (LPS03-120-0250-
3W). Please note that any damage
caused through the use of a differ-
ent adapter is excluded from the
warranty.

Never touch the mains adapter

6

with moist or wet hands.

If the lamp is not to be used for an
extended period, e.g. while you
are away on holiday, then the mains
adapter

6

must be pulled out of

the mains socket.

The bulb becomes hot during oper-
ation. Allow the lamp and bulb to
cool before you touch them.

The LEDs cannot be replaced.

The product is only suited for use
with the included mains adapter
(LPS03-120-0250-3W).

Please note, the device will contin-
ue to draw a small amount of pow-
er whilst plugged in. To switch the
device completely off, unplug the
power supply from the socket.

103792_A-B_LED-Klemmleuchte_Content_BS_GB_IE.indd 7

09.10.14 10:51

Advertising
This manual is related to the following products: