Emerson SB280 - Manual (Page 11)

10
PLAYING COMPACT DISCS
Note: Although this portable CD player can read CD-R and CD-RW discs, in addition
to normal CDs, the playability of CD-R and CD-RW discs may be effected by the
type of software that was used to create the discs, as well as the quality and condition
of the blank media you are using. 100% playability cannot be guaranteed. This is
not an indication of a problem with the player.
NORMAL PLAYBACK
1.) Move the FUNCTION selector to the CD position.
2.) Open the CD door by placing your finger in the notch on the front of the door
and lifting upward. If you have not already removed the white transit card from
the CD player, please remove it now.
3.) Place your CD on the center spindle with the printed label
side facing up. Close the CD door. The player will read the
Table of Contents and the display will show the total number
of tracks on the disc.
4.) Press the CD PLAY/PAUSE button to begin playback on
Track 1. The CD Play/Pause Indicator lights up.
• To skip to higher or lower numbered tracks during playback press the SKIP/
SEARCH or SKIP/SEARCH button repeatedly until the desired track ck
number appears in the display. Playback will begin on the selected track.
• To search rapidly forward or backward during playback to locate a specific
portion of a track, depress and hold the SKIP/SEARCH or SKIP/SEARCH
button. The player will search rapidly forward or backward as long as the
buttons are depressed. Normal speed playback will resume when the buttons
are released.
• To Pause momentarily during playback press the PLAY/PAUSE button again.
The sound stops and the Play/Pause Indicator flashes, however the disc
continues to spin. To cancel Pause and resume normal playback press the
PLAY/PAUSE button once more. Normal playback resumes and the Play/
Pause Indicator stops flashing.
SB280_033104.p65 31/3/2004, 10:45 10