Livarno KH 4112 - Manual (Page 7)

- 5 -
• Screw a new light bulb 1 into the bulb holder 3.
Use exclusively light bulbs of the type E14, 40 W.
Thereby, do not touch the bulb with your bare
hands, instead, use a soft and lint-free cloth.
• KH 4113: Replace the lampshade 2 onto the
table lamp. Secure it with the help of the cove-
ring cap 6.
• Applies to all models: Insert the power cable 5
into a power socket. The table lamp is once
again ready for use.
10. Cleaning the table lamp
Before cleaning the table lamp, always remove its
power cable from the power socket.
Clean the table lamp exclusively with a slightly
damp cloth. Ensure that no moisture can permeate
into the lamp!
Otherwise, there is the great risk of
receiving an electric shock!
11. Troubleshooting
Problem
The table lamp does not function.
Possible causes / solutions
• Check to ensure that the power cable 5 is inser-
ted into a power socket.
• Check to see if the light bulb 1 of the table
lamp needs to be replaced. To do this, follow the
steps described in section 9. "Changing the light
bulb".
• Check to see if the power socket where the power
cord 5 is plugged in is "live". To do this,
connect another electrical device to the power
socket.
• Check to see if the fuse or circuit breaker for the
electrical circuit to which the table lamp is con-
nected has been broken/triggered.
Other defects
Contact one of our service partners in your area if …
• the listed functional defects cannot be corrected
as described or
• other functional defects arise.
12. Disposal
Do not dispose of the appliance in your
normal domestic waste. This product is
subject to the European guideline
2002/96/EC.
Dispose of the appliance through an approved dis-
posal centre or at your community waste facility.
Observe the currently applicable regulations.
In case of doubt, please contact your waste disposal
centre.
Dispose of all packaging materials in an
environmentally friendly manner.
IB_64705_KH4112_14_LB4 26.04.2011 9:45 Uhr Seite 5