Livarno Z30894B - Manual (Page 4)

6 GB
Installation / Maintenance and cleaning / Service / Disposal
Now connect the connection cable of the light
to the mains connection cable (external) by
means of the terminal block
7 .
Note: Ensure that each wire of the mains
connection cable (external) is properly con-
nected in the correct place: live wire, black or
brown = symbol L, neutral wire, blue = symbol N,
protective earth wire, green-yellow = symbol .
Screw the energy-saving bulbs 4 clockwise
into the lamp fitting 3 . Ensure that the energy-
saving bulbs are seated correctly.
Note: Use a clean, fluff-free cloth when you
are inserting a bulb.
Reattach the glass dome to the lamp housing.
To do this place the glass dome on the lamp
housing and tighten the screws.
Your light is now ready for operation.
Maintenance and cleaning
DANGER TO LIFE BY ELEC-
TRIC SHOCK! Before carrying out any work on
the light, switch the electricity supply off at the fuse
box or remove the screw-in fuses from the fuse box.
DANGER TO LIFE BY ELEC-
TRIC SHOCK! For electrical safety the light must
never be cleaned with water or other liquids, or
immersed in water.
Replacing a bulb
DANGER TO LIFE BY ELEC-
TRIC SHOCK! Before carrying out any work on
the light, switch the electricity supply off at the fuse
box or remove the screw-in fuses from the fuse box.
CAUTION! RISK OF BURNS! Allow the
light to cool down completely.
Note: Use a clean, fluff-free cloth when you are
replacing a bulb.
Use 230 V∼ energy-saving bulbs with an E14 fit-
ting and a maximum power of 9 watt only.
Remove the glass dome as described in the
section on “Installation”.
Screw the defective bulb out of the lamp fitting.
Insert a new bulb in the fitting and turn the bulb
to tighten it. Check for correct seating.
Reattach the glass dome to the lamp housing
as described in the section on “Installation”.
Cleaning
CAUTION! RISK OF BURNS! Allow the
light to cool down completely.
Do not use solvents, petrol etc.
Use a dry fluff-free cloth when you are cleaning.
Service
GB
Service Great Britain
Tel.:
0871 5000 720 (0,10 GBP/Min.)
e-mail: [email protected]
IAN 66143
Disposal
The packaging is made entirely of recy-
clable materials, which you may dispose
of at local recycling facilities.
Contact your local refuse disposal authority for
more details of how to dispose of your worn-out
product.
Under no circumstances should the de-
vice / article and its bulbs be disposed
of with normal household rubbish.
The device / article and its bulbs should be disposed
of at an officially approved disposal centre or at your
local communal disposal facility.
Observe the applicable regulations. If you are
uncertain of what to do please contact your local
authority’s refuse disposal department.
66143_livx_Deckenleuchte_Z30894B_Content_LB4.indd 6 08.07.11 15:54