Livarno 1240/026L - Manual (Page 6)

6 GB
Paper Floor Lamp
Q
Introduction
Please read carefully and completely
through these operating instructions.
Fold out the page with the illustrations.
These instructions form part of the product and con-
tain important information about bringing the product
into use and its handling. Always observe all the
safety advice. Check that the correct mains voltage
is available and that all the parts have been properly
assembled before bringing into use. Should you
have any questions or be uncertain as to how to
operate the device, please get in touch with your
dealer or service point. Please keep these instruc-
tions in a safe place and hand them on to a third
party if necessary.
Q
Proper use
This light is suitable only for interior use, in dry and
enclosed spaces. This lamp is intended for use only
in a domestic environment.
Q
Included items
Check that all the items and accessories are
present and that the lamp is in perfect condition
immediately after unpacking.
1 x Paper shade
4 x Rods A-D including bulb holder brackets
1 x Mains plug with foot switch and 2 bulb holders
2 x Cable clips
1 x Terminating ball
1 x Assembly pin (installed in rod A)
Q
Description of parts
1 terminating ball
2 assembly pin
3 upper holder
4 upper fitting
5 cable clip
6 lower holder
7 lower fitting
8 foot switch
9 mains plug
10 nut
11 cable clip
12 lower fixing stirrup
13 paper shade
14 upper fixing stirrup
Q
Technical information
Model no.: 1240 / 026L,
1215 / H26L,
1229/ 026L
Operating voltage: 230 - 240 V ~ 50 Hz
Bulbs: 230 - 240 V, 40 W, E 14
candle bulb (not supplied)
Power rating: 2 x 40 W
Protection class:
Q
Safety
Safety advice
The right to claim under the guarantee shall be
rendered invalid in respect of damage caused by
the non-observance of these operating instructions.
No liability is accepted for consequent damage.
No liability is accepted for damage to property or
persons caused by improper handling or non-ob-
servance of the safety advice.
Introduction / Safety