Livarno 1240/026L - Manual (Page 8)

8 GB
j Screw the bulbs (E14, max. 40 W, not included)
into the bulb holders 4 + 7 . Use a dry, fluff-
free cloth for this. Check that the bulbs are
correctly seated.
j Screw the end ball 1 off the thread of rod A.
j Carefully pull out the paper shade 13 to
extend it.
j As you are doing this, slide the paper shade 13
carefully upwards over the assembled rods.
j Place the upper fixing stirrup 14 on the upper
thread of rod A and screw the end ball 1 on
to the thread (see Fig. E).
j Insert the mains plug 9 into an electrical
output socket. Your lamp is now ready for
operation.
Q Switching on / off
j Turn the lamp on and off with the foot switch 8 .
Q bulb Replacement
c CauTIon! DanGER oF ELECTRIC
ShoCk! First remove the mains plug 9 from
the socket. Allow the lamp to cool down
completely.
j Screw the nut 10 off rod D.
j Remove the terminating ball 1 from rod A.
j Pull the paper shade 13 carefully upwards.
j Use a clean, lint-free cloth to replace the bulb.
j Unscrew the broken bulb from the fitting and
insert the new bulb (E 14 max. 40 Watt) into
the fitting. Check that it is firmly in place.
j Reattach the paper shade 13 as described in
the section “Installing the Bulb”.
Q
Maintenance and Cleaning
c CauTIon! DanGER oF ELECTRIC
ShoCk! Remove the lamp from the socket first.
j Allow the lamp to cool down completely.
c CauTIon! DanGER oF ELECTRIC
ShoCk! When cleaning, only use a dry,
lint-free cloth. For reasons of electrical safety,
the light must never be cleaned with water or
other fluids or be immersed in water.
j Do not use any solvents, petrol or similar. This
would cause damage to the light.
Q Disposal
The packaging and ancillary packing consist entire-
ly of environmentally-friendly materials. They can
be disposed of at your local recycling facility.
The symbol of the wheelie bin with the
line through it means that, in the European
Union, the product has to be disposed
of in a separate refuse collection. This applies to
the product and to all components bearing this
symbol. Products marked in this way may not be
disposed of along with normal domestic waste but
have to be handed in at a recycling collection point
for electrical and electronic appliances. Recycling
helps to reduce the consumption of raw materials
and to ease the burden on the environment.
Q
Information
Q Guarantee
You receive a 36 month warranty on this product,
valid from the date of purchase.
The device has been carefully produced under
strict quality control.
Within the warranty period we shall rectify without
charge all material and manufacturing defects. In
the event of a defect arising during the warranty
period, please send the device to the listed Service
Centre address, making reference to the following
article number: 1240 / 026L, 1215 / H26L,
1229/ 026L.
Wear parts (such as bulbs) and damage caused
by improper handling, non-observance of the oper-
ating instructions or unauthorised interference are
excluded from the warranty.
The performance of services under the warranty
does not extend or renew the warranty period.
Preparations for use / Maintenance and Cleaning / Disposal / Information