ELAN Home Systems GR2000 - Manual (Page 18)

Routing Software 06-02 (OS3) Installation Guide
8 S-9181-31X
3 Installing Software
When installing this program product in a new MC64, do it by the procedure
described below using a backup slot. Table 3-1 lists the files used to install the
software.
1. Log into a GR2000 with an account that the user has set (for example, RSHUDWRU ).
2. Execute a admin command to switch to the DGPLQ mode.
3. Insert an MC to be updated into a backup slot.
4. Execute an mc format command to format the MC in the backup slot.
5. Using FTP, transfer the file listed in Table 3-1 to a place under the /primaryMC/usr/
var/update directory in the GR2000 by the file name of 83'$7(WJ] (be sure to
transfer in the binary mode).
6. Execute ls –l /primaryMC/usr/var/update to check that the size of transferred files is
the same as the size of files in the CD-ROM individually.
7. Enter cd /primaryMC/usr/var/update to move to the relevant directory.
8. Execute ppupdate UPDATE.tgz secondary to install the software in the backup MC.
9. Execute a synchronize –a secondary command to synchronize the current and
backup MCs in terms of the configuration definition files and the password
information.
10. The installation is now complete.
Table 3-1 Files used for Installation
No. Directory in CD-ROM Name of File
1 ALL BA62.tgz