Livarno Z30802A-BS / Z30802B-BS - Manual (Page 25)

23 GB/MT
Safety Information
packaging materials. Danger of suffocation.
Keep out of the reach of children.
J This device is not a toy and should not be
played with by children. Children are not able
to understand the dangers that can occur when
handling this device.
WArnInG! rISK OF FAtAL InJUrY!
During installation keep children away from the
area in which you are working. The scope of
supply includes a number of screws and other
small parts. These may prove lifethreatening if
swallowed or inhaled.
J Children or persons who lack the knowledge or
experience to use the device or whose physical,
sensory or intellectual capacities are limited must
never be allowed to use the device without
supervision or instruction by a person responsible
for their safety. Children must never be allowed
to play with the device.
J CAUtIOn! DAnGEr OF EXPLO-
SIOn! Do not operate the lamp in
potentially explosive environments
in which there are inflam mable vapours, gases
or dusts.
J
F
The light can be installed on all
normally flammable surfaces.
J CAUtIOn! rISK OF InJUrY!
Broken lamp glass must be replaced
before any further use is made of
the lamp.
J This lamp is only intended for use
indoors.
Danger to life from
electric shock
J Every time before you connect the lamp to the
mains, you should check the power supply
cable
12 and, if need be, the connection
cable 7 for any signs of damage.
J Never use your lamp if you discover any
damage.
m CAUtIOn! Damaged power supply cables
and connecting cables are a danger to life as
you could suffer an electric shock.
J Before assembly, ensure that the mains voltage
available corresponds to the operating voltage
J Never let the lamp come into contact with
water or other liquids.
J Never open or insert anything into electrical
fittings or equipment. Doing this sort of thing can
lead to a serious danger to life from electric
shock.
J Touch only the insulated part of the plug when
connecting to or disconnecting from the mains
supply.
J If the external flexible cable of this lamp is
damaged, it may only be replaced by a special
cable or a cable that is only available from the
manufacturer or his service representative.
J Use only the original power supply cable 12
to connect the under-cabinet light to the mains
current.
J Connect only original under-cabinet lights of
the same type (Model Z30802A / Z30802B)
with each other. To do so, use only the original
connection cable
7 supplied.
J Connect the under-cabinet lights that are linked
up together to one socket only. Make sure that
you only connect a maximum of 10 linked-up
under-cabinet lights of the same type to one
socket. Otherwise this might overload the con-
nections and cables.
J Make sure that all under-cabinet lights are
linked up via connecting cables before inserting
the power supply cable
12 into the socket.
to avoid danger of fire
and injury
m rISK OF InJUrY! Immediately after un-
packing the lamp, check the lamp housing 3 ,
the protective glass 10 as well as the power
supply cable 12 and, if need be, the connec-
tion cable 7 for damage. Do not install the
lamp if you discover any damage. If anything
is damaged, contact the service centre to
arrange a replacement.