Livarno Z31336 - Manual (Page 7)

7 GB
If you disregard these instructions and advice,
the battery may discharge beyond its mini-
mum voltage. Thus increasing the chance of
leakage. If the battery in your device leaks,
remove it from the device immediately to
prevent the device from being damaged!
Do not short-circuit the battery contacts.
Avoid the danger of
death from electric shock!
Before use, ensure that the available mains
voltage agrees with the operating voltage
specified for the product (230 volt ∼).
Do not use the product if you discover it is
damaged in any way.
The product contains delicate electronic
components. The device could be damaged
if it is placed in the immediate vicinity of
equipment that emits radio wave energy.
This may include mobile phones, wireless
phones, CB radios, radio signal remote con-
trols or other types of remote control units
and microwave ovens. If you experience
faults, remove such equipment from the
vicinity of the device.
Never open any of the electrical equipment
or insert any objects into it. Such interventions
represent the danger of death from electric
shock.
Never let the product come into contact with
water or other liquids.
Never touch the lamp 1 with moist or wet
hands.
Never use the product in the immediate vi-
cinity of a bath, shower or swimming pool.
This lamp is suitable only for
use indoors.
You cannot control any other devices with
the remote control handset 2 .
Connect the lamp to an AC supply
only. Note that the lamp is not dim-
mable.
Use
Before first use screw the supplied lamp 1
into an E27 fitting. When doing this, ensure
that the lamp is securely seated.
Remove the battery insulation strip from be-
tween the battery 13 and the battery com-
partment 11 of the remote control handset 2
before the first use.
Press the I button 4 to switch on the colour-
changing lamp.