Silvercrest SHMS 300 A1 - Manual (Page 5)

- 3 -
Do not submerge the blender or the hand mixer
in water. If necessary, clean the lower part of
the blender with the blade under running wa-
ter. The ap-pliance could become irreparably
damaged if it is submerged.
• Arrange for defective power plugs and/or cables
to be replaced at once by qualified technicians
or our Customer Service Department.
Risk of Injuries:
• During use, do not come into contact with the
whisk, the kneading hooks or the knife on the
blender. The blade of the blender is sharp.
Therefore, ALWAYS handle the blender with
care. Do not allow long hair, scarves and such
like to hang over the mixing attachments.
• NEVER attempt to assemble ancillaries with
differing functions at the same time.
Risk of electrical shocks.
• The power cable must never come into close
contact with hot parts of the appliance or other
sources of heat. Do not allow the power cable
to lie on sharp rims or edges.
• Do not fold or crush the power cable.
Items supplied
1 Hand mixer
1 Mixing stand
1 Mixing bowl with lid
2 Kneading hooks
2 Whisks
1 Blender
1 Dough scraper
Operating instructions
Description of Components
1 Speed switch
2 Fixture for the blender, with safety cover
3 Power cable with power plug
4 Release button
5 Unlocking button
6 Mixing stand
7 Mixing bowl
8 Filler opening
9 Lid
0 Turbo button
q Ejection button
w Blender
e Whisk made of stainless steel
r Kneading hooks made of stainless steel
t Dough scraper
Unpacking
• Take all components out the packaging.
• Remove all packaging materials and transport
restraints.
• Check that all of the items listed are present and
that they do not show signs of damage.
Placing
• Place the mixer stand 6 onto a level surface.
Three suction discs have been fixed to the base
of the mixer stand 6 to prevent it sliding during
operation.
• Ensure that the mains power socket is easily
accessible in the event of a risk situation.
IB_53198_SHMS300A1_LB4 28.05.2010 13:59 Uhr Seite 3