Silvercrest TWINTALKER 4810 - Manual (Page 63)

Twintalker 4810 63
Twintalker 4810
EN
GL
ISH
10 Charging the batteries
When the batteries are installed, the
desktop charger provides drop-in
charging conveniency.
1. Put the desktop charger on a flat
surface.
2. Plug one end of the supplied
adapter into an easy accessible
electric socket and the other end
into the connector on the
backside of the desktop charger
.(See folded cover page -
illustration C)
3. Put the radio in the charger as
indicated.
4. The charging LED will turn on
if it’s properly inserted and charging.(See folded cover page - illustration D)
It will take about 8 to 10 hours to fully charge the batteries.
11 Description
See folded cover page - illustration A
1. LCD display
2. Headset connection
3. Antenna
4. Call button
5. Menu button
– Enter the menu settings
6. Down button
– Decrease the speaker volume
– Select the previous value in the menu
7. Charger contacts
8. Microphone
25
26
Do not press the PTT-button of the PMR’s while they are placed in the
charger !
Do not short-circuit the batteries or dispose in fire. Remove the
batteries if this device is not going to be used for a long period.
Do not charge non rechargeable batteries like Alkaline batteries in the
charger. This might damage the PMR’s and charger unit.