Edimax Technology Broadband Router User Manual
Page 11
10
Menu
Description
Cable Modem
Your ISP will automatically give you an IP address
Fixed-IP xDSL
Your ISP has given you an IP address already
PPPoE xDSL
Your ISP requires you to use a Point-to-Point Protocol over Ethernet (PPPoE)
connection.
PPTP xDSL
Your ISP requires you to use a Point-to-Point Tunneling Protocol (PPTP) connection.
L2TP xDSL
Your ISP requires you to use a Layer Two Tunneling Protocol (L2TP) connection.
Telstra Big Pond
This Protocol only used for Australia
’s ISP connection.
Click on one of the WAN type and then proceed to the manual
’s relevant sub-section (1.1, 1.2, 1.3, 1.4, 1.5 or 1.6). Click
on Back to return to the previous screen.
1.1 Cable Modem
Choose Cable Modem if your ISP will automatically give you an IP address. Some ISP
’s may also require that you fill in
additional information such as Host Name and MAC address (see screen below).
Note: The Host Name and MAC address section is optional and you can skip this section if your ISP does not require
these settings for you to connect to the Internet.