Edimax Technology Broadband Router - Manual (Page 18)

17
2.1 System
The system screen allows you to specify a time zone, to change the system password and to specify a remote
management user for the broadband router.
Parameters Description
Time Zone
Select the time zone of the country you are currently in. The router will set its time based
on your selection
Password Settings Allows you to select a password in order to access the web-based management website.
Remote Management You can specify a Host IP address that can perform remote management functions.
Select one of the above three system settings selections and proceed to the manual
’s relevant sub-section
2.1.1 Time Zone
The Time Zone allows your router to reference or base its time on the settings configured here, which will affect functions
such as Log entries and Firewall settings.
Parameter Description
Set Time Zone
Select the time zone of the country you are currently in. The router will set its time
based on your selection.
Time Server Address The router default the “Time Server Address” is “192.43.244.18”
Daylight Savings
The router can also take Daylight savings into account. If you wish to use this function,
you must check/tick the enable box to enable your daylight saving configuration
(below).
Times From Select the period in which you wish to start daylight Savings Time
Times to Select the period in which you wish to end daylight Savings Time
Click <Apply> at the bottom of the screen to save the above configurations. You can now configure other advance
sections or start using the router (with the advance settings in place)