Silvercrest SDBC 3.5 A1 - Manual (Page 60)

57
K2*(9#$>+&;)()$+"10$4)
^$#F,+#./H.'(.4).#"4F#"4,E"7,+1#$+4)2(,4(4?#,$#2L.#12."E#(',4(4?#
centre please check the following table before contacting the
costumer service. A variety of possible problems and relevant solutions
)"4#&.#$,+43#L.'.#t(2L#./H7"4"2(,41O
The steam ironing
centre does not show
any function.
The iron does not show
any function.
The iron soleplate
does not heat up.
You get no or little
steam.
The steam ironing centre
is not connected to the
wall-socket.
The Auto-Shut-Off
function is activated.
The iron plug is not
connected to the iron
socket .
The electric power
supply is disconnected.
The steam ironing centre
is switched off.
The temperature
adjustment knob is
2+'4.3#,4#ba^DcO
There is not enough wa-
ter in the boiler.
The steam ironing
centre is not yet ready
for steaming
The steam setting is not
high enough.
Plug it in and switch the
steam ironing centre
on by pushing the main
power switch .
Switch the steam ironing
centre off and on again
by pushing the main
power switch .
Put the iron plug in the
iron socket .
Plug the steam ironing
centre in.
Switch it on by pushing
the main power switch
.
Turn the temperature
adjustment knob
to a higher setting.
Fill up the tank with
water.
Wait until the steam
ready indicator
-"1L.1O
Turn the steam
selection knob to a
higher setting.
PROBLEM REASON SOLUTION
Put the iron plug in the
iron socket .
9
.
7
by pushing the main
power switch . 7
on by pushing the main
power switch .
7
socket .
9
13
Put the iron plug in the
14
The iron plug is not
14
adjustment knob
to a higher setting.
11
adjustment knob is
11
4
selection knob to a
8