Escient ZP-'1 - Manual (Page 22)

PAGE 22
FireBall™ ZP-1 User
’s Manual
CONNECTING TO A FIREBALL MUSIC SERVER
FireBall ZP-1 streams audio from a FireBall Server over an Ethernet
network. Your FireBall ZP-1 Music Player must be on the same
Ethernet network as your FireBall server. This section will assume that
you have properly connected your FireBall client to the same network
as your FireBall server. Please refer to the FireBall ZP-1 Quick Setup
document for instructions on properly connecting your FireBall ZP-1 to
your Ethernet network before proceeding with this section.
If your FireBall ZP-1 is properly configured on the same Ethernet
network as your FireBall Music Server, the ZP-1 will automatically
select the first server it sees on the network and connect to it upon
startup. You won’t have to do anything else.
CONNECTING TO A DIFFERENT FIREBALL SERVER
If you have more than one server on your network, you can manually
select a different server using the Server Connection screen.
Follow these steps to manually select a FireBall Music Server:
1. Press the SETUP key on the remote to display the Setup menu.
2. Select the NETWORK menu.
3. Select the SERVER CONNECTION menu.
4. Select the name of the FireBall server you want to connect to.
5. Select the SAVE button to save your selection.
The Music Guide will appear and display the music content from your
FireBall server or from your computer if you are running FireBall-PC
software. You can now access all of your music using the FireBall
ZP-1.