Silvercrest Z28414 - Manual (Page 39)

39 GB/MT
Trouble-shooting / Cleaning / Disposal
Q Cleaning
j Clean the device using a slightly moist cloth.
For more stubborn dirt you can also apply a
weak soap solution to the cloth.
j Do not use chemical cleaners or scouring
agents for cleaning the device.
j Never immerse the device in water or other
liquids. Ignoring this advice may damage the
device.
Q Disposal
The packaging is made entirely of recy-
clable materials, which you may dispose
of at local recycling facilities.
Contact your local refuse disposal authority for more
details of how to dispose of your worn-out product.
To help protect the environment, please
dispose of the product properly when it
has reached the end of its useful life and
not in the household waste. Information
on collection points and their opening
hours can be obtained from your local
authority.
Faulty or used batteries must be recycled in accord-
ance with Directive 2006 / 66 / EC. Please return
the batteries and / or the device to the available
collection points.
Environmental damage through
incorrect disposal of the batteries!
Batteries may not be disposed of with the usual
domestic waste. They may contain toxic heavy metals
and are subject to hazardous waste treatment rules
and regulations. The chemical symbols for heavy
metals are as follows: Cd = cadmium, Hg = mercury,
Pb = lead. That is why you should dispose of used
rechargeable batteries at a local collection point.
EMC
Product description:
Body Analyser Scale
Model No.: Z28414
Version:
10 / 2010
Error display Meaning Solution
Err The maximum load of 180 kg (400 lb)
has been exceeded.
Step off the platform 3 of the scales
in order to avoid injuries or damage
to property.
ErrL The body fat percentage measured
is too low or is below the minimum
measurable value of 4.0 %.
–
Errh The body fat percentage measured
it too high or is above the maximum
measurable value of 60.0 %.
–
Various error mes-
sages appear in
the LC display 11 .
Radio transmission devices (mobile
phones, microwave ovens, etc.) interfere
with the operation of the scale.
- Remove the radio transmission devices
from proximity of the scale.
- Remove the batteries from the battery
compartment 6 and wait for about
10 seconds, then insert the battery
back to the battery compartment 6 .