Silvercrest SHTR 2200 D2 - Manual (Page 11)

9 GB
9. Trouble-shooting
If your device fails to function as required,
please try this checklist first. Perhaps there is
only a minor problem, and you can solve it
yourself.
DANGER! Risk of electric
shock! Do not attempt to repair
the device yourself under any cir-
cumstances.
10. Technical
specifications
Subject to technical modification.
11. Warranty of the
HOYER Handel GmbH
Dear Customer,
your device is provided with a 3 year war-
ranty starting with the purchase date. In the
event of product defects, you are entitled to
statutory rights against the vendor. These
statutory rights are not restricted by our war-
ranty presented in the following.
Warranty conditions
The warranty period starts with the purchase
date. Please keep the original purchase re-
ceipt in a safe place. This document is re-
quired to verify the purchase.
If within three years from the purchase date
of this product a material or factory defect
occurs, the product will be repaired or re-
placed by us – at our discretion – free of
charge to you. This warranty implies that
within the period of three years the defective
device and the purchase receipt are present-
ed, including a brief written description of
the defect and the time it occurred.
If the defect is covered by our warranty, the
repaired or a new product will be returned
to you. No new warranty period starts with
a repair or replacement of the product.
Warranty period and statutory
claims for defects
The warranty period is not extended when
the warranty has been claimed. This also ap-
plies to replaced and repaired parts. Any
damages and defects already existing at the
time of purchase must be reported immedi-
ately upon unpacking. Repairs arising after
the expiration of the warranty period are
subject to a charge .
Warranty coverage
The device was produced carefully according
to strict quality guidelines and tested diligent-
ly prior to delivery.
Fault Possible causes / Action
No
function
• Has the device been con-
nected to the power supply?
• Has the overheating protec-
tion switched off the device?
Set the on/off switch to 0
(off), pull the mains plug out
of the wall socket and allow
the device to cool down ad-
equately. Ensure that no
hair or foreign bodies are
blocking the air inlet before
switching the device back
on.
Model: SHTR 2200 D2
Mains voltage: 230-240 V ~ 50 Hz
Protection class: II
Power rating: 2000 - 2200 W
__KRA102826_Haartrockner_B4.book Seite 9 Freitag, 12. September 2014 11:01 11