Silvercrest SKW 3 EDS A1 - Manual (Page 9)

- 7 -
Troubleshooting
• If the display 6 shows „Err“, the scale is over-
burdened. Remove items from the scale. Never
place more than 5 kg on the scale.
• If the display 6 briefl y indicates „Err“ and the
weighing mode cannot be switched on, the scale
is overburdened. Remove items from the scale
and then switch the scale back on again. Place
less than 5 kg on the scale.
• If the display 6 shows „Lo“, the batteries are
discharged. Replace the batteries.
Notice
The indicator “Lo” only appears in the weighing
mode.
• If „- - - -“ appears in the display 6, wait for a
few seconds.
• Should your scale not function as expected,
replace the batteries. Should the malfunction
not be eliminated with these steps please make
contact with our Service Centre (see “Service“).
Changing the batteries
WARNING - Property Damage!
Pay attention to the correct polarity when exchang-
ing batteries. An incorrect battery exchange could
lead to the risk of an explosion. Only exchange
batteries for identical or equivalent types. Should
the batteries leak, clean the battery compart-
ment 2 with a dry cloth whilst wearing protective
gloves.
Risk of poisoning!
Batteries can be swallowed by children and cause
a serious impairment of health. Keep the batteries
out of the reach of children.
To exchange the batteries, open the battery 1)
compartment cover on the underside of the
scales.
Pull on the tab to open the restraint for the 2)
batteries.
Remove the batteries by loosening them from 3)
the battery compartment 2 with the aid of
the small cloth strip.
Insert the new batteries into the battery com- 4)
partment 2. Pay heed to the polarity mark-
ings given in the battery compartment. The
small cloth strip must lie under the batteries.
Press the restraint for the batteries down so 5)
that it engages.
Press and close the battery compartment 6)
cover, until it locks in place.
Storage
When the kitchen scale is not in use it can be hung
up by means of the integrated suspension 1, for
example from a kitchen ledge.
Cleaning
WARNING - Property Damage!
• Ensure that no fl uids can permeate the scale.
Permeating liquids can damage the scale.
• Do not use abrasive or aggressive cleaning
materials. These could attack the upper sur-
faces and irreparably damage the appliance.
• Wipe the scale clean with a cloth lightly mois-
tened by a mild detergent solution or use a spe-
cial stainless steel cleaner. Do not use abrasive
or solvent cleaners.
• Clean the display 6 with a lightly moistened
cloth only and then wipe it dry with a lint-free
towel.
IB_64679_SKW3EDSA1_LB4.indb Abs1:7 IB_64679_SKW3EDSA1_LB4.indb Abs1:7 16.05.2011 8:51:54 Uhr 16.05.2011 8:51:54 Uhr