Disposal, Troubleshooting, Technical specifications – Silvercrest SDBE 2400 A1 User Manual

Page 53

Advertising
background image

51

GB

10. Disposal

This product is subject to the
provisions of European Direc-
tive 2012/19/EC. The sym-
bol showing a wheelie bin
crossed through indicates
that the product requires sep-
arate refuse collection in the European Un-
ion. This applies to the product and all
accessories marked with this symbol. Prod-
ucts identified with this symbol may not be
discarded with normal household waste, but
must be taken to a collection point for recy-
cling electric and electronic appliances. Re-
cycling helps to reduce the consumption of
raw materials and protect the environment.

Packaging

When disposing of the packaging, make
sure you comply with the environmental reg-
ulations applicable in your country.

11. Troubleshooting

If your device fails to function as required,
please try this checklist first. Perhaps there is
only a minor problem, and you can solve it
yourself.

DANGER! Risk of electric
shock!
Do not attempt to repair the
device yourself under any
circumstances.

12. Technical

specifications

Subject to technical modification.

Fault

Possible causes / Action

No
function

• Connect the device to the

mains power supply.

• Use the temperature control-

ler|16 to turn up the temper-
ature.

Little or
no steam

• Fill the water tank|15 to at

least one quarter full.

• Switch on the steam flow

rate controller|3(

).

• Run the self-cleaning cycle.

Steam
burst is
not work-
ing.

• Fill the water tank|15 to at

least one quarter full.

• Set the right temperature.
• Leave a pause of a few sec-

onds between steam bursts.

Spray
burst is
not work-
ing.

• Fill the water tank|15 to at

least one quarter full.

• For the first spray burst, you

need to pump several times.

Acoustic
alarm
(bleep) /
operat-
ing
lamp|6
flashes.

Automatic shut-off, if:
-

the device has stood still in
vertical position for approx.
8 minutes.

-

the device has stood still on
the sole plate for approx.
30 seconds.

-

the device has laid on its
side for approx. 30 sec-
onds.

Pick up the steam iron by its han-
dle|7 and hold it horizontally for
a few seconds or make some
ironing movements.

Model:

SDBE 2400 A1

Mains voltage:

220 - 240 V ~ 50/60 Hz

Protection class: I

Power rating:

2,000 - 2,400 W

Fault

Possible causes / Action

_CPE100696_Dampfbügeleisen_B2.book Seite 51 Freitag, 11. Juli 2014 10:34 10

Advertising