Before using for the first time, Operation, 1 preparing the appliance – Silvercrest SRGS 1300 A2 User Manual

Page 10

Advertising
background image

8

5. Before using for the first time

During manufacture, many parts are given a
thin film of protective oil. Before using the
appliance for the first time, heat it up without
any food so that any residues can
evaporate.

Note:

When heating up for the first few

times a slight smell may be produced. Make
sure the room is adequately ventilated.
1. Take the appliance and all the accessory

parts out of the packaging.

2. Check that the appliance shows no signs

of damage.

3. Remove any labels or stickers (but

not

the type plate on the underside).

4. Clean the appliance before using it for

the first time. Observe the information in
the section entitled "7. Cleaning" on
page 10.

5. Select a location that is firm, level and

not flammable. Maintain a distance of
approx. 50 cm from other objects.

6. Turn the temperature regulator

5

to "0".

This switches the appliance off.

7. Plug the mains plug into a suitable mains

socket that corresponds to the technical
data.

8. Turn the temperature regulator

5

to

MAX

.

The indicator lamp

3

lights up and the

appliance heats up.

9. Leave the appliance switched on for

around 10 - 15 minutes.

10. Switch the appliance off by turning the

temperature regulator

5

to "0".

11. Take out the mains plug and allow the

appliance to cool down.

12. Clean the appliance again. Observe the

information in the section entitled
"7. Cleaning" on page 10.

6. Operation

6.1 Preparing the appliance

1. Select a location that is firm, level and

not flammable. Maintain a distance of
approx. 50 cm from other objects.

2. Turn the temperature regulator

5

to "0".

This switches the appliance off.

3. Grease the raclette pans lightly

7

on the

inside.

Note:

Use kitchen paper dipped in a

little cooking oil.

4. Lightly grease the top surface of the

stone grill plate

1

and grill plate

2

.

Note:

Do not use too much oil as this

could catch fire and burn. Spread the oil
carefully using a cooking brush or
kitchen paper.

5. Place the stone grill plate

1

and grill

plate

2

on the appliance.

Note:

The grooves on the stone grill

plate

1

must face up. The grill plate

2

can be used on both sides.

6. Plug the mains plug into a suitable mains

socket that corresponds to the technical
data.

7. Turn the temperature regulator

5

clockwise to

MAX

.

RP75604 Raclette hs LB4 Seite 8 Donnerstag, 19. Juli 2012 9:56 09

Advertising
This manual is related to the following products: