Silvercrest SKRD 30 A1 - Manual (Page 14)

12
Handling and operation
SKRD 30 A1
GB
IE
CY
Setting the time
Prerequisite: The device is in the operational mode clock/standby operation.
Press the Bass/AMS/Mode ♦ 7 button once. The time of day indicator
begins to blink.
Set with the buttons Tune+ ♦ 13 and Tune– 12 the current time of day. With
each button press the time of day changes by one minute. Holding down
the respective button for more than 2 seconds starts the speed setting.
Press the Bass/AMS/Mode ♦ 7 button again to save the current setting and
move to the next menu item.
NOTICE
The time of day will revert back to ► o'clock if the device is disconnected
from the mains power supply and no battery is inserted or if the battery is too
weak.
Setting the date
Prerequisite: The device is in the operational mode clock/standby operation.
Press the Bass/AMS/Mode ♦ 7 button twice. The date indicator begins to
blink.
Set with the buttons Tune+ ♦
13
and Tune– 12 the current date. With each
button press the date is changed by one day. The weekday indicator changes
automatically. Holding down the respective button for more than 2 seconds
starts the speed setting.
Press the Bass/AMS/Mode ♦ 7 button again to save the current setting and
move to the next menu item.
NOTICE
The date will revert back to ► , if the device is disconnected from the
mains power supply and no battery is inserted or if the battery is too weak.
Setting the memory function
You can set up to 10 date reminders to which an automatic reminder will be
triggered. The function SdA (SdA=Special Day Alert) is useful as a reminder, for
example, of birthdays or other recurring events. The reminder occurs every year
on the same date.
Prerequisite: The device is in the operational mode clock/standby operation.
Press the Bass/AMS/Mode ♦ 7 button three times. The current setting of the
selected reminder date is shown alternating with the indicator . Next to
the indicator is the number of the memory slot for that date. Possible
reminders are to
.