Silvercrest STMS 2219 A1 User Manual

Page 51

Advertising
background image

Wireless keyboard with wireless mouse STMS 2219 A1

English - 49

Batteries

Insert the batteries with the correct polarity. Never try to recharge the batteries and under no

circumstances throw them into fire. Do not mix battery types (old and new or carbon and alkaline,

etc.). Remove the batteries when the device is not to be used for a long time. Improper use may
cause explosions and danger to life.

RF Interface

Turn the device off when onboard an aircraft, in a hospital, in an operating theatre or in the vicinity

of medical electronic equipment. The RF signals may interfere with the functionality of sensitive

devices. Keep the device at least 20cm (8 inches) away from pacemakers, as the RF signals may
interfere with the functionality of the pacemaker. The transmitted RF signals can cause interference

with hearing aids. Do not place the device with the wireless adapter turned on near flammable

gases or in a potentially explosive area (e.g. a paint shop), as the transmitted RF signals may cause

explosions or fire. The range of the radio wave signals depends on environmental conditions.

When data is transmitted via a wireless connection it may also be received by unauthorized

parties. Targa GmbH is not liable for any interference caused to RF or TV signals through

unauthorized modification to this device. Furthermore, Targa does not assume any liability for

replacing any cables or devices that have not been specifically approved by Targa GmbH. The
user is solely responsible and liable for troubleshooting any interference caused by unauthorized

modification of this device and for replacing appliances.

Operating Environment

Position the device on a stable, flat surface and do not place any objects on the device. The device

is not designed for use in environments with high temperatures or humidity (e.g. bathrooms), and

must be kept free of dust. Operating temperature and operating humidity: 5 °C to 40 °C, max.
90% RH.

Always make sure that:

-

no direct heat sources (e.g. radiators) can affect the device;

-

the device is not exposed to direct sunlight or artificial light;

Advertising