Handling and operation – Silvercrest SLBB 4 A1 User Manual

Page 12

Advertising
background image

9

SLBB 4 A1

GB

Handling and operation

This section provides you with important information on
handling and using the device.

Charging the battery

Before using the device, the integrated battery must be
completely charged.

CAUTION

The battery should only be charged in a dry environment.

Switch the speaker off .

Connect the USB plug on the charger cable 9 to
a PC or to a USB power supply.

Connect the micro USB plug on the charger cable 9 to
the POWER INPUT connection socket 7 on the device.
The operating LED 1 lights up red and the battery
charges.

NOTE

The operating LED 1 lights up red during charging
and goes off when the battery is fully charged.

The charging time is approximately 2 hours with
a charging current of 500 mA and allows music
play-back of up to 3 hours. The playback time may
vary depending on usage (volume).

When the battery is exhausted, you will hear a
beep every 5 seconds and the battery must be
recharged. You can also use the speaker while it
is charging.

IB_103019_SLBB4A1_LB4.indb 9

10.10.14 12:54

Advertising