Silvercrest SBB 850 A1 - Manual (Page 7)

- 5 -
Control panel
 Display
Display for
 selection of the weight
(750 g, 1000 g, 1250 g)
 the remaining baking time in minutes and
the programmed time
 the selected level of browning (light
,
medium , dark , rapid )
 the selected program number
 the programme sequence
 the addition of ingredients („ADD“)
 Start / Stop
To start and stop an operation or to delete a
time-programming.
 










To interrupt the operation, briefly press the Start/Stop
button
 until a signal tone sounds and the time in
the display
 flashes. By once again pressing the
Start/Stop button
 within 10 minutes, the opera-
tion can be continued. Should you forget to re-start
the programme, after 10 minutes it will be automati-
cally continued.
To completely terminate the operation or to delete
a programming, press the Start/Stop button
 for
3 seconds, until long signal tone sounds.

Note:
Do not press the Start/Stop button
 if you want
to simply check the condition of the bread. You can
watch the baking operation through the viewing
window.

Warning!
When pressing all buttons an acoustic signal must
be audible, unless the appliance is in operation.
 Level of browning (or Rapid modus)
Select the browning level or switch into the Rapid
modus (light/medium/dark/Rapid). Press the
Browning Level button
 repeatedly, until the
arrow is located above the desired browning level.
For the Programmes 1 - 4 you can, through repea-
ted pressing of the Browning Level button
 ,
activate the Rapid modus to shorten the baking pro-
cess. Press the Browning Level button

repeatedly until the arrow appears over "Rapid". A
browning level cannot be selected with the
programmes 6, 7 and 11.
 Timer
 
Time-delayed baking.

Note:
Time-delayed baking cannot be arranged with
Programme 11.
IB_69294_SBB850A1_LB4 12.08.2011 13:16 Uhr Seite 5