Eurotech Appliances WL1000 - Manual (Page 32)

32 WL1000 User Manual
PASSWORD
Used to set the password properties
PC CONNECTION
Used to set the PC connection properties.
These settings control the connection between your Zypad WL1000 and a desktop
computer.
POWER
Used to check battery power and set the power properties.
The “Battery” tab
Provides an indication of the battery charge level
If the “Very Low” warning message is shown, the remaining time is less than 30 minutes
before the device shuts down.
The “Schemes” tab
Allows you to select one of the power available schemes: Battery Power or AC Power
You can also choose the amount of time that must pass before the system will switch to
the next power conservation state.
The available power conservation states are:
User Idle: the user has stopped interacting but may still be using the device
System Idle: Entered after a period in User Idle, driver and system process are still
active
Suspend: Entered when driver and system process stop interacting with the system
“Device Status” Tab:
Shows the power level provided for each specific device.
The power level ranges from “High (D0)” which means the device is at the highest
power level to “Off (D4)” which means the device is at the lowest power level
NOTE: The battery status is also displayed with an icon on the task bar.
The AC adapter is providing power to the WL1000
The AC adapter is providing to the WL1000 and is charging the main
batteries.
The battery is providing power to the WL1000.
The battery is very low and needs charging.
!