Extron electronic ISM 482 - Manual (Page 53)

Programmer’s Guide, cont’d
Integration Scaling Matrix Switcher • Programmer’s Guide 4-6
X2 Dvz X17
A front panel horizontal detail filter adjustment has occurred for the S-video or
composite video
input tied to output X2 . X17 is the filter variable.
1Blu X19
The blue-only mode has been turned on or off from the front panel for one or both
outputs.
X19 is the on/off status for the either or both outputs. The leading “1” is
meaningless.
1Fil X19
The edge enhancement mode has been turned on or off from the front panel for one
or both outputs.
X19 is the on/off status for the either or both outputs. The leading
“1” is meaningless.
RGB delay
X2 Dly X20
A front panel RGB delay adjustment has occurred. X2 is output number and X20 is
the delay value, in 0.01 second steps. X20 can be as much as 50 = 5.0 seconds.
Test pattern
Tst X19 * X21
A test pattern has been turned on or off from the front panel for one or both
outputs.
X19 is the on/off status for the two outputs and X21 is the test pattern
selected.
Audio gain and attenuation
X1 Aud X22
A front panel audio input level adjustment has occurred. X1 is input number and
X22 is the audio gain or attenuation level.
Video and audio mute
X2 Vmt X3
A front panel video mute operation has occurred. X2 is output number and X3 is
the mute status: 0 = off (video not muted), 1 = on (video muted).
X2 Amt X3
A front panel audio mute operation has occurred. X2 is output number and X3 is
the mute status: 0 = off (audio not muted), 1 = on (audio muted).
PAL film mode
X1 Flm X3
The PAL film mode has been selected or deselected from the front panel for the
selected input.
X1 is input number and X3 is the on/off status for PAL film mode.
Automated adjustments
Img X3
The Auto Image feature has been turned on or off from the front panel for all tie
creations.
X3 is the on/off status.