Silvercrest SIM 13 A1 - Manual (Page 30)

- 28 -
Utilisation
In use, the infra red lamp 9 creates warmth and it
penetrates into the deeper layers of skin. This has a
stimulating effect and is thus effective against
tiredness and tensions.
With vibration switched on in the massage head 1,
a relaxing and pain relieving effect can be achie-
ved for tired muscles through gentle massage.
Taking into use
Unpacking
• Take the Infra Red Massage Appliance and the
accessories from the packaging.
• Remove all packaging material.
Attention:
Do not permit small children to play with plastic
packaging. There is a risk of suffocation!
Adjusting the rotatable parts of the
massage appliance
• With the revolvable ring 3 the massage head
1 can be turned through a radius of 270°.
Thus either the infra red lamp 9 or the massage
head 1 is directed at the body part to be treated.
The grip 7 can be turned in five levels over a
radius of 90°.
• For this, press the locking button on the swing
arm 8 down and move the grip 7.
• Release the locking button 8 and turn the grip
7 until it engages.
Equipping the massage head with
accessories
Select, according to the application requirement, an
accessory (0, q, w, e, r, t) for the massage:
The roller accessory 0:
Stimulates the blood circulation. Guide the roller
accessory back and forth over the whole of the
body.
The nub accessory q:
The 21 nubs are suitable for deep massage and
large muscle groups.
The surface accessory w:
Use this accessory on the whole body to relieve
muscle pain and tensions.
The Shiatsu accessory e:
The Shiatsu accessory simulates the finger posture
of a masseur and is suitable for deep massage.
The knead-massage accessory r:
This accessory is suitable for kneading simulation
and deep massage.
The accessory for exacting massage t: Use
this accessory for the massage of individual muscle
groups.
1. Release a possibly fitted accessory from the
massage head 1, in that you hold the grip
cavity 2 and pull it off.
2. Place the accessory (0, q, w, e, r, t) of
your choice on the massage head 1 and pay
attention that the round curbs of the massage
head 1 and the accessory (0, q, w, e, r,
t
) lie one on top of the other.
3. Push the accessory (0, q, w, e, r, t) onto
the massage head then check to make sure that
it is firmly fixed.
IB_56458_SIM13A1_LB5 27.08.2010 12:39 Uhr Seite 28