Silvercrest SIM 13 A1 - Manual (Page 31)

- 29 -
Usage
• Insert the power plug into a wall power socket.
Switching on
• To switch on the Infra red lamp slide the switch
INFRARED 4 into the position "I".
• Slide the switch MASSAGE 5 into the position "I"
for normal vibration.
• For a stronger vibration slide the switch MASSAGE
5 into the position "II".
ATTENTION!
After an extended heating-up of the infra red lamp
9
without bodily contact, the temperature of the
lamp can be perceived as unpleasantly high! Al-
ways check the temperature of the infra red lamp
9
with the tip of a finger before making contact
with the body itself. A temperature that is too high
can be reduced by switching the infra red lamp 9
off for a short period.
Massage
• Hold the Infra Red Massage Appliance by the
grip 7 and, dependant on the application,
place the infra red lamp 9 or the massage
head 1 against the skin.
• Guide the infra red lamp 9 or the massage
head 1 in circular or straight movements slowly
over the skin.
• Massage without applying undue pressure.
• To achieve an optimal effect, try to keep the skin taut.
• Always start the massage at the position furthest
from the heart and then slowly work towards the
heart.
Ending usage
Switching off
• After use, dependant on the application, return
the switches INFRARED 4 and
MASSAGE 5 back into the position "0".
• Remove the plug from the wall power socket.
WARNING!
After use do not lay the Infra Red Massage Appli-
ance down with the infra red lamp 9 facing down-
wards! It could still be hot and there is still a grave
risk of fire!
• When laying it down always ensure there is
sufficient safety distance between the massage
appliance and inflammable objects such as
curtains, tablecloths etc..
• Remove the accessories (0, q, w, e, r, t)
from the massage head 1 and lay the massage
appliance with the flat area of the massage
head 1 facing downwards.
ATTENTION!
For approx. 15 minutes after the last usage do not le-
ave the appliance without supervision.
Storage
• Allow the Infra Red Massage Appliance to cool
sufficiently after the last usage then store it in a
carton or in a cool and dry location.
IB_56458_SIM13A1_LB5 27.08.2010 12:39 Uhr Seite 29