Silvercrest SLS 2000 B2 - Manual (Page 53)

50
Troubleshooting
SLS 2000 B2
GB
Malfunction causes and remedies
The following table will help with localizing and remedying minor malfunctions:
Defect Possible cause Solution
The connected
device will not
charge.
The voltage of the
device is not compat-
ible with the charging
station. Consult the device's operating instructions.
Faulty connection
between the device and
the charging station. Make sure that the adapter cable and/or iPod/
iPhone cable is properly connected to the
device and charging station.
Wrong adapter cable
used. Check the adapter cable and, if necessary,
change it.
The operating
LEDs of the
charging station
do not glow.
Faulty connection
between the charging
station and the mains
power supply unit
9 .
Make sure that the mains power supply unit's
9
connection cable is correctly connected to the
connection socket
2 on the charging station.
Mains power socket is
not working properly. Check to see if the mains power socket is pro-
viding power by plugging in another device.
NOTICE
► If the malfunction cannot be resolved with the above mentioned solution
suggestions or if other forms of malfunction occur please get in touch with
our service department (see chapter Service).
Troubleshooting
Buch_75830_LB2.indb 50 Buch_75830_LB2.indb 50 31.08.12 10:20 31.08.12 10:20