Silvercrest Z30509 - Manual (Page 16)

16 GB
Bringing into use / Cleaning / Disposal
 = The LC display
1
shows the error message “Err.”.
= Wait until the device switches itself off or remove the batteries (see
“Replacing the batteries”) return the device to the default settings.
Switch on the device using the On/Set button
7 .
 = The LC display
1
shows the error message “LO”.
= The batteries are exhausted.
= Replace the batteries (see “Replacing the batteries”).
 = The LC display
1
shows the error message “Err-h” /
“Err-L”.
= The measured body fat proportion is outside the displayable
range.
= The body fat analyser is not suitable for the measurement of people
who are extremely under- or overweight (below 4.0 or above 60 %).
Q 
Cleaning
J  Do not use chemical cleaners or scouring agents for cleaning the
device.
J  Never immerse the device in water or other liquids. Ignoring this
advice may damage the device.
j  Clean the device using a slightly moist cloth. For more stubborn
dirt you can also apply a weak soap solution to the cloth.
Q 
Disposal
The packaging is made entirely of recyclable materials,
which you may dispose of at local recycling facilities.