Silvercrest Z30258-BS - Manual (Page 39)

39 GB/MT
Operation

Press the SUSTAIN key again to switch off the
sustain function.
Vibration:

Press the VIBRATION button to assign the
played notes with a pitch vibrato.
Note: Drum and auto-accompaniment are not
assigned to work with this effect.

Press the VIBRATION key again to switch off
the vibrato function.
Dual mode:
In dual mode you can add a second sound to the
already selected one.

Press the DUAL button and then select a sec-
ond sound using the RHYTHM / TONE button.
The roll-up piano now plays two sounds at the
same time.

Press the DUAL key again to switch off the dual
mode.
 Special functions (FUNCTION)
Programming mode (percussion):
Note: The roll-up piano can store up to 50 percus-
sion notes one after the other.

Press the PROGRAM button. The programming
mode is active. The RECORD LED illuminates
green.

Press the keys of the keyboard to play the de-
sired percussion sequence.
Note: In this mode, the keyboard has 19
different percussion sounds assigned, which
repeat themselves in a regular pattern along
the keyboard.

Refer to Fig. E for more information.

Press the PLAY button to start or stop the
programmed sequence.
Note: While the percussion sequence is being
played, you can also play the keys on the key-
board to add percussion sounds. When the
sequence has stopped, the keys on the key-
board are once again assigned with the normal
tones.

Press the PROGRAM button to quit the pro-
gramming mode.
Note: The programmed sequence remains
stored until you restart the programming mode,
switch off the instrument or load the recording
memory with a keyboard track in accordance
with the following section.
Recording mode (Keyboard):
Note: The roll piano can store up to 50 notes.

Press the RECORD button. The recording mode
is active. The RECORD LED lights up in green.

Play the desired sequence.

Press the PLAY button. The stored recording is
played back.

Press the PLAY button again to exit the play-
back mode.

Press the RECORD button again to stop
recording. The RECORD LED goes off.
Note: Once you exit the record mode, the
recording is deleted.
Tuning - changing the pitch (KEY-SHIFT):

Press the KEY-SHIFT button to change the pitch
of the roll-up piano.

Then press the + or – on the selection button
RHYTHM / TONE to set the sound a semi-tone
higher or lower with each button press.

Press the + and – on the selection button
RHYTHM / TONE simultaneously to bring the
sound back to the normal tuning setting.
 Learning function (LEARNING)
Selecting a demo song:
Note: In this mode the settings for tone and
rhythm cannot be changed.

Press the DEMO SONG button. Now song
number 0 is played.

Press the DEMO SONG button to stop the
song playing.

Press the DEMO SONG button again to play
the song with the next number.