Silvercrest SMK 15 A1 - Manual (Page 9)

SMK 15 A1 7
5.2 Changing the fuse in the car lead
There is a fuse in the car lead 11 to protect the
car’s electrical system. If there is no power
supply and the car lead 11 stops working, you
should check and, if applicable, change this
fuse.
1. Twist the cap A a little anticlockwise and
pull it forwards and off.
2. Undo the screw B.
3. Remove half of the plug C.
4. Remove the fuse D.
5. Insert a new type T6.3AL 250V fuse.
6. Reassemble the car plug in the reverse
order.
Note:
The metal tip E is held by the fuse.
Check that it is correctly positioned when
reassembling the plug.
6. Disposal
6.1 Appliance
The symbol with the crossed-
out rubbish bin on wheels
means that within the European
Union, the product must be dis-
posed of to a sorted rubbish
collection. This applies to the
product and all accessories which are
marked with this symbol. Marked products
must not be disposed of via the regular
domestic waste but must be handed in to a
recycling centre for electrical or electronic
devices. Recycling helps to reduce the use of
raw materials and to relieve the environ-
ment. You can obtain information about dis-
posal and the location of your nearest
recycling centre from your local waste
management service, for example, or Yellow
Pages.
B
A
C
D
E
RP71570 MiniCool LB4 Seite 7 Dienstag, 6. Dezember 2011 10:18 10