About this guide, Who should use this guide, How to use this guide – Enterasys Networks SecureStack C2RPS-CHAS2 User Manual
Page 13
SecureStack C2 Installation Guide xi
About This Guide
This guide provides an overview, installation and troubleshooting instructions, and
specifications for the Enterasys Networks™ SecureStack C2 redundant power supply
chassis (C2RPS‐CHAS2), power supply module (C2RPS‐PSM), DC power cables
(C2RPS‐PSM Cable), and AC power cords.
Who Should Use This Guide
This guide is intended for a network administrator responsible for installing and setting
up the stackable switch.
How to Use This Guide
Read through this guide completely to familiarize yourself with its contents and gain an
understanding of the features and capabilities of the RPS components. A general working
knowledge of data communications networks is helpful when setting up an RPS
(C2RPS‐CHAS2 chassis with optional power supply modules).
Note: In this document, the following terms are used:
• RPS refers to a complete redundant power system, which includes a C2RPS-CHAS2
chassis and optional power supply modules.
• Chassis refers to the C2RPS-CHAS2 chassis.
• PSM refers to the C2RPS-PSM power supply module.
• PSM cable refers to the C2RPS-PSM Cable (12 Vdc power cable).
Electrical Hazard: Only qualified personnel should perform installation procedures.
Riesgo Electrico: Solamente personal calificado debe realizar procedimientos de
instalacion.
Elektrischer Gefahrenhinweis: Installationen sollten nur durch ausgebildetes und
qualifiziertes Personal vorgenommen werden.