Silvercrest SDR 1000 A1 - Manual (Page 15)

13 GB
NOTE: To ensure a smooth shave at all times, the appliance
must be cleaned and maintained regularly.
Cleaning after each shave
1. Press both release buttons 3 and take off the shaving
head 2.
2. Carefully tap any loose debris out of the shaving head 2.
3. Clean the cutter block 20 with the cleaning brush 19.
4. Rinse off the cutter block 20 and the shaving head 2 under
cold, running water.
5. Attachments 11 / 12 / 13 may be washed in warm water
with a little added mild soap.
6. Let all parts dry completely.
7. Click the shaving head 2 into position on the appliance.
Periodical maintenance
• As required, wipe the appliance (not the shaving foil 1) with
a slightly moistened cloth.
• Check the shaving foil 1 regularly for damage and replace it
if necessary as described in the section "Replacing the
shaving foil" on page 14.
• Depending on the intensity of use, but at least every six
months, carefully spread a little sewing machine oil onto the
shaving foil 1 with your finger.
__RP61923_Buch4.book Seite 13 Montag, 29. August 2011 12:44 12