Service and operation, Radio operation – Silvercrest KH 2431 User Manual
Page 110
107
Service and Operation
KH 2431
GB
Operation during playback
♦
To pause the playback, press the button PHONO ▸II . The turntable stops
and the tone arm remains in its current position.
IMPORTANT
Possible damage to the record or the needle.
If playback is stopped when the needle is still on the record it can lead to
damage.
►
Move the lever to the forward position before you press the button
PHONO ▸II
.
♦
To resume an interrupted playback, press the button PHONO ▸II and
then move the lever to the rear position.
♦
To stop playback, press the button PHONO
. The turntable stops and
the tone arm returns to its starting position.
Radio operation
NOTE
►
For good radio reception the wire aerial must be completely unwound.
Align the aerial in radio mode for the best reception.
►
The technical characteristics of the device permit reception of selectable
frequencies beyond the VHF (FM) range of 87.5-108 MHz. In some countries
various national regulations regarding the allocated radio frequency range
can exist. Please note that information received outside of the assigned radio
frequency ranges may not be exploited, passed on to third parties or
otherwise misused.
Switching the radio function on
♦
Press repeatedly on the button FUNCTION until TUNER is indicated
on the display.
Buch_53140_LB2.indb 107
05.04.12 12:22