Silvercrest KH 2431 - Manual (Page 79)

76
Service and Operation
KH 2431
GB
MT
Vinyl record operation
Starting playback of records
♦ Press repeatedly on the button FUNCTION until PHONO is indicated
on the display.
♦ Open the dust cover
♦ Place the record onto the turntable.
NOTE
► For playing records with a large centre hole (Singles) you use the adapter .
♦ With the turntable speed selection switch set the required rotation speed.
NOTE
► The rotation speed is printed on the record label.
♦ Remove the protective cover from the stylus.
♦ Release the securing lever of the tone arm.
♦ Move the lever to the front position to raise the tone arm.
♦ Swing the tone arm to the desired position on the record.
♦ Move the tone arm lever to the rear position to lower the tone arm and
to place the stylus onto the record.
NOTE
► At the end of the record, the tonearm automatically returns to its starting
position.
Fine adjustment of the rotation speed
The rotation speed is correctly set, when the broken line visible through the view-
ing window is not moving.
♦ If the lines move in a clockwise direction, slide the adjustment control
PITCH ADJ.
backwards in the direction -.
♦ If the lines move in an anti-clockwise direction, slide the adjustment control
PITCH ADJ.
forwards in the direction +.
Buch_53140_LB5.indb 76 05.04.12 14:00