Emerson Process Management ITONE IC200 - Manual (Page 23)

2 2
Presetting Stations In The Tuner Memory
You can store a total of 20 stations, 10 FM and 10AM, in the tuner memory for
easy recall at any time.
1.) Using either the Automatic or
Manual Tuning method described
above, tune to the first station you
wish to store in the tuner memory.
Example: FM 92.5 MHz
2.) When the desired frequency appears on the display, press the Memory button
on the top panel once.
“F 1” will begin flashing on the
display indicating that you can now
store your station in FM Preset
Memory #1.
3.) Press the MEMORY button again.
The “F 1” stops flashing. This
indicates that FM 92.5 is now
stored in FM Preset Memory #1.
4.) Tune to the next station that you wish to store.
Press the Memory button once, then press the Preset button to select
Preset Memory #2.
“F 2” begins flashing in the display.
5.) Press the Memory button again to enter your desired station in Preset Memory
#2.
6.) Repeat steps 4 and 5, using the Preset or buttons to select a different
preset memory number each time until you have stored up to 10 FM stations in
the memory.
iC200_052906.p65 29/5/2006, 10:29 22