Emerson Process Management ITONE IC200 - Manual (Page 32)

3 1
Alarm Operation
The dual alarms in this system give you the option of waking to the radio, an
electronic buzzer tone, or even to your iPod ® .
NOTE: You cannot wake to the iPod ® Shuffle.
You may also program one or both of the alarms for weekdays only, weekends
only, or everyday operation.
Before activating the alarms first check the settings for Alarm 1 and Alarm 2 and
adjust if necessary.
Refer to “Adjusting The Wake Up Times” and “Selecting The Alarm Mode” on
pages 17 and 18.
Wake To Radio
1.) Tune to the station that you want to wake you up, adjust the Volume control to
the desired level, and then shut the system ‘Off’.
2.) Slide the Alarm 1 and/or Alarm 2 selector switches, located on the left side
panel to the “Radio” position.
The AL 1 and/or AL 2 indicators will appear in the main display to confirm that
the alarms are ‘On’.
3.) At the selected wake-up time the
radio will turn on to the selected
station. It will play for one hour and
then shut off automatically and
reset itself for the following day.
To shut the radio off sooner you can press either the Power button or the
appropriate Alarm 1 or Alarm 2 button on the top panel.
iC200_052906.p65 29/5/2006, 10:29 31