Silvercrest SAR 28 A1 - Manual (Page 125)

121 SAR 28 A1
GB
Connection of an external subwoofer
Use the orange SUBW 26 cinch output to connect an external subwoofer.
To do this, follow the operating instructions for the external subwoofer.
Connection diagram
1 2 3 4
5 6 7 8
1 2 3 4
5 6 7 8
ISO A
ISO B
Installation
The device can be installed into any standard ISO mounting bay. In the event that
your vehicle does not have an ISO mounting bay, contact your local specialist
workshop, local dealer or the technical department of a general store.
NOTE
► Connect up the cables before fi nally installing the device.
Ensure that it is plugged in properly and that the system works correctly.
Installation instructions
■ Install the device in the bay provided or select the installation location so
that all buttons can be reached easily without the driver being impeded.
■ Only connect the device to a 12 V car battery that is installed properly.
■ Only connect up the device within the vehicle via the ISO plugs.
■ Install the device in such a way as to prevent heat build-up and so that the
device is adequately ventilated.
External amplifi er
Subwoofer Antenna
IB_42775_SAR28A1_LB1.indb 121 IB_42775_SAR28A1_LB1.indb 121 22.10.13 16:07 22.10.13 16:07