Silvercrest SAR 28 A1 - Manual (Page 128)

124 SAR 28 A1
GB
Using the device
Face plate
You are able to remove the face plate from your device as an anti-theft measure.
Do not keep the face plate in your vehicle after removal.
NOTE
► Always keep the face plate in its case 29 to protect it.
Inserting the face plate
♦ First, place the face plate with its right-hand
side against the holder
20 .
♦ Then press the left-hand side into the frame until
the locking mechanism
19 engages.
Check to ensure that the face plate is fi tted correctly
and is securely connected to the main device. Not
installing the face plate correctly can result in mal-
functions when using the device.
2.
1.
Removing the face plate
♦ Press the button to unlock the face
plate. The left-hand side of the face plate jumps
forwards slightly.
♦ Remove the face plate by its left-hand side fi rst,
then by its right-hand side.
IB_42775_SAR28A1_LB1.indb 124 IB_42775_SAR28A1_LB1.indb 124 22.10.13 16:07 22.10.13 16:07