Silvercrest SDKT 1.76 A1 - Manual (Page 151)

SilverCrest SDKT 1.76 A1
English - 149
Auto Talk
If the handset is on the base when an incoming call arrives, the call can be accepted automatically by
removing the handset from the base. Press the  or  directional control buttons [4] to switch this
function on or off. To save the selected setting, press the right display button [3].
Recall
You can use the Recall button ( ) of the directional control [4] during a call for switching to an internal
conversation or to forward the call when using the device with a PBX. The Recall button ( ) will cause
a short, temporary line interruption. You’ll have to adjust the following settings only when you have
connected the telephone to a PBX. See also the User Manual for your PBX.
The following options are available:
 Short
Off-hook cycle 100 ms
 Long
Off-hook cycle 300 ms
To save the selected setting, press the right display button [3].
The Recall button ( ) allows you to use specific services for external phone calls, e.g. “Call
Waiting”. The requirement for this is that your network provider supports this feature.
Prefix
Here you can save a number to be dialled before any external call. For example, you can enter 0 or 9
for an external line if you are using a PBX.
If no phone number has been saved, the only available menu option will be “New”. If a
phone number has been saved already, the items “On/Off”, “Show/Hide” and “Edit” will
be shown.
New
Here you can save the number to be dialled before any external call. Input the phone number via the
numeric buttons [6]. Press the right display button [3] to save it.