Eurotech Appliances EDV158 - Manual (Page 11)

11
ENGLISH
ADDING AN ITEM
If you wish to interrupt a program to add or remove an item from the dryer, simply open the door. The dryer
will stop and the heating element will shut off. To resume the program, shut the door and turn the Program
knob to the 12:00 position. When you hear a short tone you can then turn the Program knob to the desired
program.
CHANGING A PROGRAM
If you decide to change the program setting after you have started the machine, simply turn the Program
knob to the 12:00 position. Wait for the tone then turn the Program knob to the new program.
RECOMMENDED PROGRAMS
AND TEMPERATURE SETTINGS
The table below is intended to help you determine which program is best for each type of load.
Fabric Type Program
Temp
Setting
Load
Size
Heavy cottons and denims Extra Dry Normal Full
Cottons and linens w/out elastic and/or decorative
trim, white and colorfast items Normal Normal Full
Fabric Type Program
Temp
Setting
Load
Size
White and colorfast perma press Normal Delicate Half
White and colorfast items that require ironing Iron Dry Delicate Half
Polyester/acrylic blends, rayon, acetate Damp Dry Delicate Half
Washable silk and nylon Damp Dry Delicate Third
Fabric Type Program
Temp
Setting
Load
Size
Heavy cottons and denims 60' Normal Full
Cottons and linens w/out elastic and/or decorative
trim, white and colorfast items 40' Normal Full
White and colorfast perma press 40' Delicate Half
White and colorfast items that require ironing 20' Delicate Half
Polyester/acrylic blends, rayon, acetate 20' Delicate Half
Washable silk and nylon 20' Delicate Third
Timed
Synthetics
Cottons/Linens