Items supplied, Before using for the first time, Making ice cream – Silvercrest SECM 12 A1 User Manual

Page 45

Advertising
background image

43

GB

4. Items supplied

1 motor unit1
1 lid2
1 bowl5
1 ring6
1 container7
1 mixing blade4
1 connecting piece3
1 operating instructions

5. Before using for the

first time

DANGER!
Risk of electrocution!
The motor unit1 must not be im-
mersed in water.

NOTE: When being used for the first time,
the appliance may give off an odour. This is
due to the design of the appliance and is
perfectly normal. Ensure sufficient ventila-
tion in the room.

1. Remove all parts from the packaging.
2. Check that all parts are complete and

intact.

3. Wipe off the motor unit1 with a slight-

ly damp cloth.

4. Wipe out the inside of the bowl5 with

a damp cloth.

5. Rinse all other parts thoroughly in

warm water.

6. Dry all parts well.

6. Making ice cream

6.1 General

Ingredients

• You will achieve a superior product

above all by using fresh, high-quality in-
gredients.

• Dairy products with a high fat content

(e.g. cream, crème fraîche, double
cream, mascarpone) result in a creamy
consistency and improve flavour.

• When following recipes in which the

sugar is not dissolved make sure you use
very fine sugar. Sugar will make the ice
cream firmer and at the same time pre-
vent the formation of large ice crystals.

• When using frozen fruit, it does not

need to be completely defrosted. For ex-
ample, it is easier to puree fruit when
still half frozen.

• Ice cream will remain softer if alcohol is

added.

Instructions

• Your ice cream will be particularly suc-

cessful if you cool the bowl5 and the
prepared mix sufficiently beforehand.

• The ice cream produced will be soft and

spoonable. Serve immediately. This is
when it will taste best.

• If the ice cream has not become suffi-

ciently firm after 40 or so minutes, put
in the freezer until it has reached this
firmness.

__RP86375_B2.book Seite 43 Mittwoch, 21. November 2012 2:21 14

Advertising