Silvercrest SNS 45 A3 - Manual (Page 17)

14 SNS 45 A3
GB
Handling and operation
In this chapter you receive important information for the handling and operation
of the appliance.
NOTICE
► See also the chapter Appliance and Accessories.
Switching On and Off
♦ Switch the UV appliance 1 on by pressing the ON/OFF switch 2 to the
position “I”. The operating indicator 3 lights up and the appliance is ready
for use.
♦ Switch the UV appliance 1 off by pressing the ON/OFF switch 2 to the
position “0”. The operating indicator 3 extinguishes.
Functions
Three diff erent treatment times can be set on the appliance:
■ 90 seconds (Button 9)
■ 150 seconds (Button 7)
■ 240 seconds (Button 5)
♦ Switch the UV lamps on by pressing the Start button 0.
♦ Select the desired treatment time and then press the appropriate time preselect
button 9, 7 or 5.
NOTICE
► The UV lamps switch off automatically after the lapse of the preset time.
♦ Press the time preselect button 9, 7 or 5 and the Start button 0 once
again as described above for any further treatments.