Silvercrest SNS 45 A3 - Manual (Page 22)

19 SNS 45 A3
GB
Matching a nail set
♦ Carefully fi le the transitions from the nail tips i to the natural nails with the
Sandpaper fi le u until they conform to the contour of the natural nail. File
only the nail tips i! Do not damage your natural nail.
♦ Carefullly fi le the sides of the nail with the Sandpaper fi le u until it is straight
and does not exhibit a “wing”.
♦ Repeat this step for each individual nail.
u
♦ Remove the dust from fi ling with a paper cloth or cellulose pad z.
Application of the UV-Gel
♦ Using the brush e, take a small amount of UV Gel a and then wipe the
excess on one side of the brush e off on the edge the UV Gel pot.
♦ Apply a thin coating of UV-Gel a onto the complete nail. Apply a little more
UV Gel a to the lower part of the nail, as hereby is how the off set between
the natural and the artifi cial nail is created. Furthermore, the transition from
natural to artifi cial nails is especially sensitive to pressure and knocks, thus
more UV Gel a must be applied here.
INFORMATION
► When you are doing the application do not press too heavily on the brush e,
since the brush e could otherwise cause streaking.
► Model the fi rst layer of the UV Gel a very carefully, as this determines the
future shape of the nail. Model the best possible natural nail shape.
♦ Maintain a distance of about 1 mm from the cuticle during the application.