Silvercrest SECM 12 A1 - Manual (Page 44)

42 GB
~ Never place the appliance on hot sur-
faces (e.g. a hob) or near sources of
heat or naked flame.
~ Only use genuine accessories.
~ The appliance is fitted with non-slip sili-
cone feet. As furniture is coated with
various varnishes and plastics and may
be treated with different cleaning prod-
ucts, it cannot be completely ruled out
that some of these substances contain
components which may attack and sof-
ten the silicone feet. If necessary, place
a non-slip mat underneath the appli-
ance.
~ Do not use harsh or abrasive cleaning
agents.
~ All appliance accessories should be
cleaned by hand. (The mixing blade5
can also be cleaned in the dishwasher.)
~ Should liquid leak from the housing of
the bowl, the bowl must be discarded.
Although this liquid is not toxic, it is un-
suitable for consumption.
~ The appliance includes protection from
overheating. This will switch the appli-
ance off to prevent the motor overheat-
ing. In this case unplug and wait until
the motor has cooled down, at least for
15 minutes.
4. Items supplied
1 motor unit2
1 lid3
1 bowl6
1 ring7
1 container8
1 mixing blade5
1 connecting piece4
1 operating instructions
5. Before using for the
first time
DANGER!
Risk of electrocution!
The motor unit2 must not be im-
mersed in water.
NOTE: When being used for the first time,
the appliance may give off an odour. This is
due to the design of the appliance and is
perfectly normal. Ensure sufficient ventila-
tion in the room.
1. Remove all parts from the packaging.
2. Check that all parts are complete and
intact.
3. Wipe off the motor unit2 with a slight-
ly damp cloth.
4. Wipe out the inside of the bowl6 with
a damp cloth.
5. Rinse all other parts thoroughly in
warm water.
6. Dry all parts well.
__RP103445_B2.book Seite 42 Montag, 13. Oktober 2014 1:53 13